Woodstock SHOP FOX W1755 Owner's Manual download pdf (Page 11)

-9-

W1755 6" Parallelogram Jointer

ELECTRICAL

DO NOT work on your electrical system

if you are unsure about electrical

codes and wiring! Seek assistance from

a qualified electrician. Ignoring this

warning can result in electrocution,

fire, or machine damage.

ELECTRICAL

We do not recommend using an extension cord; however,

if you have no alternative, use the following guidelines:

• Use a cord rated for Standard Service (S).

• Do not use a cord longer than 50 feet.

• Ensure that the cord has a ground wire and pin.

• Use the gauge size listed below as a minimum.

Extension Cords

110V/220V Operation

The Model W1755 is prewired for 110V operation, but

you can rewire it for 220V operation (refer to the wir

ing diagram on Page 41

). We recommend connecting this

machine to a dedicated circuit with a verified ground,

using the circuit size given below. Never replace a circuit

breaker with one of higher amperage without consulting

a qualified electrician to ensure compliance with

wiring

codes.

This machine must be grounded! The electrical cord sup

plied with this machine comes with a grounding pin. If

your outlet does not accommodate a ground pin, have it

replaced by a qualified electrician.

If you are unsure about the wiring codes in your area

or you plan to connect your machine to a shared cir

cuit, you may create a fire or circuit overload hazard—

consult a qualified electrician to reduce this risk.

6-15P 6-15R

Figure 6. NEMA 5-20 and 6-15 plugs and

receptacles.

Operating Voltage Amp Draw Min. Circuit Size Plug/Receptacle Extension Cord

110V Operation 15 Amps 20A NEMA 5-15 12 Gauge

220V Operation 7.5 Amps 15A NEMA 6-15 14 Gauge

Electrical Specifications

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 55 56

Comments to this Manuals

No comments

Woodstock SHOP FOX W1755 Owner's Manual Page 11

Comments to this Manuals

Related products and manuals for Power planers Woodstock SHOP FOX W1755