Woodstock W1829 User Manual download pdf (Page 26)

-24-

Model W1829 (Mfg. Since 9/11)





The purpose of bevel cutting is to cut a specific angle into

the edge of a workpiece (see ).

The Model W1829haspresetfencestopsat45˚inward,

90˚,and45˚outward(135˚).Ifyoursituationrequires

a different angle, the preset fence stops can be easily

adjusted for your needs.



 Read and understand , beginning on .

 Make sure your stock has been inspected for danger-

ous conditions as described in the 

 instructions, on .

 Set the cutting depth for your operation.

Note: We suggest between

⁄16" and

⁄8" for bevel

cutting, using a more shallow depth for hard wood

species or for wide stock.

 Make sure your fence is set to the angle of your

desired cut.

 If your workpiece is cupped (warped), place it so the

concave side toward the fence.

 Start the jointer.

 With a push block in your leading hand, press

the workpiece against the table and fence with

firm pressure, and feed the workpiece over the

cutterhead, as in Figure 35.

: If your leading hand gets within 4" of the

cutterhead, lift it up and over the cutterhead,

and place the push block on the portion of the

workpiece that is on the outfeed table. Now, focus

your pressure on the outfeed end of the workpiece

while feeding, and repeat the same action with

your trailing hand when it gets within 4" of the

cutterhead. To keep your hands safe, DO NOT let

them get closer than 4" from the cutterhead when it

is moving!

 Repeat  until the angled cut is satisfactory to

your needs.

NOTICE

      



    

     

     



 Typical bevel cutting operation.

 Illustration of bevel cutting

results.

Portion

Removed With

Jointer

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 47 48

Comments to this Manuals

No comments

Woodstock W1829 User Manual Page 26

Comments to this Manuals