Woodstock W1672 Instruction Manual download pdf (Page 13)

12

Figure 13. Securing bandsaw body.

Figure 12. Lifting tensioning handle.

Bandsaw Body

1. Seek assistance and place the bandsaw body

next to the stand. Rotate the bandsaw body

so the access door on the bandsaw body is

facing the same way as the cabinet door.

2. For safety, remove the bandsaw blade. To

do this, open the upper and lower doors on

the bandsaw body. Lift the tensioning han-

dle up and carefully remove blade. See

Figure 12. If the blade is hard to remove

with the tensioning handle up, rotate the

handle counterclockwise to release the

pressure. See Blade Changes section for

more details.

3. Lift the bandsaw body with the help of an

assistant. The foot of the bandsaw body will

fit into the pocket in the top of the stand.

The bandsaw body rep-

resents a heavy load.

Seek assistance before

beginning this step.

Do Not lift from the foot

of bandsaw body. Your

fingers would be at risk

of a pinch injury should

the bandsaw be placed

in this way.

4. Secure the bandsaw body as in Figure 13

with the (4)

3

⁄8"-16 x 2" carriage bolts,

3

⁄8"

hex nut and flat washers provided.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 44 45

Comments to this Manuals

No comments