Woodstock W1736 User Manual



-8-SET UPW1736 Overarm Router (Mfg. 8/10+)NOTICEWhen ordering replacement parts, refer to the parts list and diagram in the back of the manual.The fol

SET UP-9-W1736 Overarm Router (Mfg. 8/10+)1. Using four M10-1.5 x 45 cap screws and lock wash-ers, attach the support arm to the table with the rubbe

-10-SET UPW1736 Overarm Router (Mfg. 8/10+)For stable and safe operation, the overarm router should be mounted to a workbench. If you intend on using

SET UP-11-W1736 Overarm Router (Mfg. 8/10+)Figure 7. Hose/port labels on foot switch, as viewed straight on.Figure 8. Air hose attachment locations.Th

-12-SET UPW1736 Overarm Router (Mfg. 8/10+)The adapters included with the Model W1736 are designed for most common sizes of Makita, Milwaukee, Bosch,

SET UP-13-W1736 Overarm Router (Mfg. 8/10+)The router motor must be aligned with the table pin to ensure accurate work during pin routing operations.T

-14-SET UPW1736 Overarm Router (Mfg. 8/10+)Depending on the type of air fitting you have on the end of your air hose, you may need to replace the incl

-15-OPERATIONSW1736 Overarm Router (Mfg. 8/10+)OPERATIONSGeneralDO NOT investigate problems or adjust the router while it is running. Wait until the m

-16-OPERATIONSW1736 Overarm Router (Mfg. 8/10+)If the router is plunged into the pin or table, the router bit may break apart sending metal frag

-17-OPERATIONSW1736 Overarm Router (Mfg. 8/10+)Figure 18. Example pattern template for use with the table pin.Using Table PinsThe table pins are provi

This manual provides critical safety instructions on the proper setup, operation, maintenance and service of this machine/equipment. Failure to read,

-18-MAINTENANCEW1736 Overarm Router (Mfg. 8/10+)MAINTENANCELubricationThe air cylinder must be lubricated regularly. For best results, install a lubri

-19-MAINTENANCEW1736 Overarm Router (Mfg. 8/10+)TroubleshootingThis section covers the most common overarm router problems. DO NOT make any adjustment

-20-PARTSW1736 Overarm Router (Mfg. 8/10+)123681213910111418-518-518-118-318-418-715161718192021222313242547484944454626173429303132331635363737-137-2

-21-PARTSW1736 Overarm Router (Mfg. 8/10+)REF PART # DESCRIPTION REF PART # DESCRIPTION1 XPCAP70M CAP SCREW M10-1.5 X 45 29 X1736029 SHAFT2 XPLW06M LO

-22-WARRANTYW1736 Overarm Router (Mfg. 8/10+)WARRANTYWoodstock International, Inc. warrants all Shop Fox machinery to be free of defects from workmans

TAPE ALONG EDGES--PLEASE DO NOT STAPLEFOLD ALONG DOTTED LINEFOLD ALONG DOTTED LINEWoodstock international inc. p.o. box 2309 bellingham, Wa 98227-2309

High Quality Machines and ToolsWoodstock International, Inc. carries thousands of products designed to meet the needs of today's woodworkers and

USE THE QUICK GUIDE PAGE LABELS TO SEARCH OUT INFORMATION FAST!SET UP MAINTENANCE PARTS WARRANTYOPERATIONSSAFETYINTRODUCTIONTable of ContentsINTRODUCT

-2-INTRODUCTIONW1736 Overarm Router (Mfg. 8/10+)SpecificationsTable ... 19-3/4" W x

-3-INTRODUCTIONW1736 Overarm Router (Mfg. 8/10+)Controls and FeaturesA. Top Valve: Controls the speed that the router rises from the plunge (down) po

-4-SAFETYW1736 Overarm Router (Mfg. 8/10+)SAFETYStandard Machinery SafetySAFETYREAD MANUAL BEFORE OPERATING MACHINE.FAILURE TO FOLLOW INSTRUCTIONS BEL

-5-SAFETYW1736 Overarm Router (Mfg. 8/10+)10. NEVER LEAVE WHEN MACHINE IS RUNNING. Turn power OFF and allow all moving parts to come to a complete st

-6-SAFETYW1736 Overarm Router (Mfg. 8/10+)Additional Safety Instructions for Overarm RoutersUSE this and other machinery with caution and respect. A

SET UP-7-W1736 Overarm Router (Mfg. 8/10+)This machine has been carefully packaged for safe trans-portation. If you notice the machine has been damage