Woodstock REBEL W2000 User Manual download pdf (Page 11)

10 – W2000 Rebel

If using the optional safety switch, make sure it is in

the off position. You can now plug your router into the

cord connected to the back of the switch. Turn the

router switch on. Refer to the router instruction manu-

al. If everything is secure, including router collet and

all loose tools and bits are put away, you can now test

the optional switch. Plug the 110V plug from The

Rebel

switch into the wall outlet. Turn the safety lock

switch on and the router should start up.

If using The Rebel

without the optional switch,

observe all safety procedures, plug your router power

cord into an outlet and switch the router on. Some

routers have a simple toggle switch while others have

a trigger switch with locking device for hands-free

operation. If your router has a spring loaded locking

devise, depress the trigger, depress the locking devise

and then release the trigger. To turn the router off, sim-

ply depress the router switch to release the locking

device. Please refer to the instruction manual supplied

with your router for more information regarding your

particular switch.

GG.. WWiirriinngg tthhee RRoouutteerr

FFiigguurree 1122..

Marking insert for drilling.

FFiigguurree 1133..

Drill and counter sink insert.

SStteepp 33

- Drill and counter sink the screw holes in the

table insert. Fasten the router base to the

router table insert using the screws from the

router sub-base.

FFiigguurree 1133..

YYoouurr eexxiissttiinngg ssuubb--bbaassee mmoouunnttiinngg ssccrreewwss mmaayy bbee

ttoooo sshhoorrtt ttoo ssaaffeellyy sseeccuurree yyoouurr rroouutteerr ttoo tthhee ttaabbllee

iinnsseerrtt.. EEnnssuurree tthhaatt yyoouurr mmoouunnttiinngg ssccrreewwss aarree ssuuffffii--

cciieennttllyy lloonngg eennoouugghh ttoo ssaaffeellyy hhoolldd yyoouurr rroouutteerr iinn aann

iinnvveerrtteedd ppoossiittiioonn.. IIff nneecceessssaarryy,, ppuurrcchhaassee lloonnggeerr

mmoouunnttiinngg ssccrreewwss ooff tthhee ssaammee tthhrreeaadd ssiizzee ttoo sseeccuurree

yyoouurr rroouutteerr ttoo tthhee ttaabbllee iinnsseerrtt..

SStteepp 44

- Make sure all router mounting screws are fas-

tened securely and slip the router with the

router table insert into The Rebel

table.

Always wear safety glasses and follow all safety

procedures. If using an extension cord, it must be

rated “Hard Service Grade S” — or better.

Conductor size must be 12 AWG, or larger, and the

cord must contain a grounding wire and plug pin.

Repair or replace the extension cord if damaged.

SStteepp 22

- Center the sub-base on the table insert and

mark the screw mounting locations on the

table insert.

FFiigguurree 1122..

To find the center of

the table insert, position the sub-base on the

table insert so the distance from edge to edge

on the right and left side are the same and the

distance from edge to edge on the top and

bottom are the same.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 24 25

Comments to this Manuals

No comments

Woodstock REBEL W2000 User Manual Page 11

Comments to this Manuals