INSTRUCTION MANUALPhone: 1-360-734-3482 • On-Line Technical Support: [email protected] © JANUARY 2000, REVISED MARCH 2004 BY WOODSTO
-8- Shop Fox® Classic FenceFigure 5. Rear rail pad location.Rear RailSupport PadFence Shown Upside DownFence1. Raise the lock handle up to rele
Shop Fox® Classic Fence -9-Figure 6. Extension table.Extension TableAn extension table should be mounted between the fence extension rails to provide
-10- Shop Fox® Classic FenceDO NOT operate the saw without a blade guard installed. Operating without a guard creates a risk of injury from kickback o
Shop Fox® Classic Fence -11-Figure 10. Lead adjustment.1⁄64"Figure 9. Setscrews on bracket.Your SHOP FOX® Classic Fence requires little adjustmen
-12- Shop Fox® Classic FenceFigure 11. Lock Handle close up.Fence-to-Table ClearanceIt is important to minimize the gap between the bottom of the fenc
Shop Fox® Classic Fence -13-3. Centralize the magnified cursor within its range of adjustment and tighten the screws. Mark the position of the hairli
-14- Shop Fox® Classic FenceCorrecting Mounting Hole MisalignmentIf the front and back mounting holes do not line up with the existing holes in the ta
Shop Fox® Classic Fence -15-Attaching the wood facing to the fence:1. Size a suitable piece of wood for the face of the fence.2. Drill and counterbo
-16- Shop Fox® Classic FenceNOTE: The W2006 is a combination of the W2005 Fence and the W2007 Legs and 7' Rails.W2005 Fence Parts Diagram
Shop Fox® Classic Fence -17-26W2005 Standard Rail Parts Diagram
-18- Shop Fox® Classic FenceNOTE: The W2006 is a combination of the W2005 Fence and the W2007 Legs and 7' Rails.W2007 Leg and 7' Rail Parts
Shop Fox® Classic Fence -19-1 X2005001 FENCE LOCKING TAB2 X2005002 KNOB3 X2005003 BEARING PAD4 X2005004 LOCKING LEVER8 X2005008 FENCE BODY8A
CONTENTSINTRODUCTION ... 2¦¦¦¦General ...
-2- Shop Fox® Classic FenceThank you for purchasing Woodstock International’s SHOP FOX® Classic Fence. This fence is classic in its design and functio
Shop Fox® Classic Fence -3-Woodstock International, Inc. (Woodstock) warrants this product against defects in workmanship and materials under normal u
-4- Shop Fox® Classic Fence12. USE A PUSH STICK WHEN CUTTING NARROW PIECES.13. DO NOT REACH BEHIND TABLE SAW TO GRAB CUTOFF PIECE. If wood binds aga
Shop Fox® Classic Fence -5-InventoryInstallation of the SHOP FOX® Classic Fence involves mounting the front and back rails to your table
-6- Shop Fox® Classic FenceFigure 2. Mounting the front and back rails.3. Position the back rail so its top edge is flush with the table top and the
Shop Fox® Classic Fence -7-Mounting The Front Rail1. Align the side of the front rail with two rectangular cutouts against the edge of the table.2.
Comments to this Manuals