Woodstock SHOP FOX W1813 s Owner's Manual download pdf (Page 27)

-24-

N(/()Fne\ijDXelXcD]^%j`eZ\*&'0

FG<I8K@FEJ

INCORRECT

CORRECT

GcXe`e^;fjXe[;fekj

INCORRECT

CORRECT

Figure 34. Sacrificial table mounting.

Figure 33. Only plane one board at a

time.

There are some common planing mistakes that must be

avoided when planing.

JXZi`]`Z`XcKXYc\Lj\

If using a sacrificial table, you must clamp it to the cast

iron table (Figure 34) to prevent workpiece ejection.

Never stack two boards on top of one another and feed

them both into the planer/moulder to compensate for a

workpiece that may be too thin. Planing with two loose

stacked boards can result in workpiece ejection, causing

injury.

Dlck`gc\9fXi[?XqXi[

Only plane one board at a time (Figure 33). Whether you

use guide rails or not, never attempt to plane more than

one board at a time side-by-side. If one board is slightly

lower that the other, the feed roller will only hold the

highest board, while the lower board will be free to slip

when the knife contacts it. This hazardous situation can

result in one board being ejected from the machine,

causing serious injury.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 56 57

No comments

Woodstock SHOP FOX W1813 s Owner's Manual Page 27