Woodstock SHOP FOX W1796 Owner's Manual download pdf (Page 9)

Model W1796/W1797 2-Gun Spray Set

-7-

Assembly

2. Screw the cup onto the top of the

body.

3. Attach the air hose to the spray gun

with a

1

⁄4" NPT quick connect fitting

(not included).

4. Attach the spray gun to an air hose

regulated between 29 and 50 PSI.

Note: For the best results, use a hose

that will be dedicated for spray use

only. Do not use a hose that has been

used with an in-line oiler or other

possible contaminant.

1. Fluid Control: Controls the volume

of material that travels through the

fluid tip.

2. Pattern Control: Adjusts the spray

pattern from a round pattern to a

wide fan.

3. Air Flow Control: Controls the fluid

pressure inside the spray gun.

4. Atomizing Cap

: Controls the spray

pattern from vertical to horizontal.

5. Trigger: Two stage trigger. Stage

one only releases compressed air for

blowing off the work piece. Stage two

sprays material.

6. Material Cup: Holds the paint to be

sprayed.

7. Regulator/Gauge: Regulates inlet air

pressure to the spray gun. It can be

attached directly to the gun for on-

the-spot air adjustments or directly

from the air source.

Note: DO NOT attach to an unregu-

lated air source that exceeds 120 PSI.

Figure 4. Controls.

Controls

Fluid Control

Pattern Control

Atomizing Cap

Trigger

Air Flow Control

Regulator Control

Figure 3. Installing filter.

1. Insert the filter into the gun body

(see Figure

3).

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Comments to this Manuals

No comments